Make sure your new fog lights are the correct diameter and depth as your originals before you begin the install. Makes life much similar.

Step 1: Remove the fog lights from the car.

Step 2: Remove the Fog light houseing from the bracket that holds it to the bumper.

Step 3: I had to find some scrap aluminum to mount the original bracket to the new fog light. The new fog light came with brackets but they would not work on my specific bumper. So this is what I came up with. I bent the bottom edges of my 2 brackets on each side to help stiffin up the fog light and keep it in place.

Step 4: The wireing, in which Im sorry I do not have pics for because in all honestly was totally wack. I had to cut the original wireing harness for the new fog lights because it wasnt long enough to reach across the car and I already have switches in the car. For the Fog light itself I just wired it directly into the original wireing for the old fog lights. Cut the connectors off and spliced the new connectors in, very easy. The neon halo I wired into my other neons running off the switch I currently already have in the car, thus deleteing the switch they sent.
Step 5: Grab a Budwieser, Kick back, and enjoy! This was a very easy mod and looks great in person!





continue..



